Share Email Print

Proceedings Paper

Performance improvement of a 3D inspection process
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The performance of a 3-D inspection process as measured in terms of accuracy and repeatability of point cloud data obtained through the process is of great importance for proper utilization of data. This paper attempts to characterize effect of different operating conditions on system performance and to estimate a set of best operating conditions for the Capture Geometry Inside system CSS-1000. The system consists of a milling machine to cut the part one layer at a time and a vision system made up of a line-scan camera and associated software to capture images of the cut surfaces. These images are stacked to construct a 3-D point cloud data of the part. The mill-head rotation speed, milling feed rate and part orientation are some of the operating conditions studied. Accuracy is measured by comparing measured dimensions of the part with dimensions obtained from the process while spread of point cloud data from the best-fit plane on a surface provides a measure of repeatability. Tests were done on parts made up of two different materials: Aluminum and Delrin®, under two different sets of operating conditions. The results show improvement in accuracy under the new set of operating conditions for aluminum parts while repeatability improves for Delrin parts.

Paper Details

Date Published: 26 February 2004
PDF: 9 pages
Proc. SPIE 5265, Two- and Three-Dimensional Vision Systems for Inspection, Control, and Metrology, (26 February 2004); doi: 10.1117/12.514798
Show Author Affiliations
Deepak Giri, Univ. of Rhode Island (United States)
Musa Jouaneh, Univ. of Rhode Island (United States)

Published in SPIE Proceedings Vol. 5265:
Two- and Three-Dimensional Vision Systems for Inspection, Control, and Metrology
Bruce G. Batchelor; Heinz Hugli, Editor(s)

© SPIE. Terms of Use
Back to Top