Share Email Print
cover

Proceedings Paper

Designing ultrastrong materials for space applications
Author(s): Nicholas A. Kotov; Arif A. Mamedov; Maurizio Prato; Dirk M. Guldi; James P. Wicksted; Andreas Hirsch
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The mass-strength ratio is of exceptional importance for space application. The critical parts of both shuttle vehicles and satellites depends on strength and toughness of the materials they are made of, while strict limitations on the weight of the different components are placed by the launch technology. Single wall carbon nanotubes (SWNT) present significant potential as the basic material for the space applications. Exceptional mechanical properties of single wall carbon nanotubes (SWNT) have prompted intensive studies of SWNT composites. These qualities can also be used in a variety of other technologies from automotive to military and medical. However, the present composites have shown only a moderate strength enhancement when compared to other hybrid materials. Although substantial advances have been made, mechanical characteristics of SWNT-doped polymers are noticeably below their highly anticipated potential. Pristine SWNTs are well known for poor solubilization, which leads to phase segregation of composites. Severe structural inhomogeneities result in the premature failure of the hybrid SWNT/polymer materials. The connectivity with and uniform distribution within the matrix are essential structural requirements for the strong SWNT composites. Here we show that a new processing approach based on sequential layering of chemically-modified nanotubes and polyelectrolytes can greatly diminish the phase segregation and render SWNT composite highly homogeneous. Combined with chemical cross-linking, this processing leads to drastically improved mechanical properties. Tensile strength of the composites is several times higher than that of SWNT composites made via mixing; it approaches values seen for hard ceramics. The universality of the layering approach applicable to a wide range of functional materials makes possible successful incorporation of SWNT into a variety of composites imparting them required mechanical properties. The thin film membranes that are obtained in the result of the layer-by-layer process can be used as an intermediate or as a component of ultrastrong laminates. At the same time, the prepared membranes can also be utilized in the as-prepared form for the large area space telescopes (both radio and optical) because the combine the strength and multiple functionality of the SWNT membranes with the ease of deployment.

Paper Details

Date Published: 30 January 2004
PDF: 10 pages
Proc. SPIE 5166, UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts, (30 January 2004); doi: 10.1117/12.510117
Show Author Affiliations
Nicholas A. Kotov, Oklahoma State Univ. (United States)
Arif A. Mamedov, Oklahoma State Univ. (United States)
Maurizio Prato, Univ. di Trieste (Italy)
Dirk M. Guldi, Univ. of Notre Dame (United States)
James P. Wicksted, Oklahoma State Univ. (United States)
Andreas Hirsch, Univ. Erlangen-Nuernberg (Germany)


Published in SPIE Proceedings Vol. 5166:
UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts
Howard A. MacEwen, Editor(s)

© SPIE. Terms of Use
Back to Top