Share Email Print
cover

Proceedings Paper

New capabilities of the CEM-TEK 1200 interferometric comparator for calibrating long gauges, step gauges, and now line scales
Author(s): Emilio Prieto; Joaquin Rodriguez
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Using of length materialized standards is necessary to calibrate CMMs according to ISO 10360 written standard. CEM calibrate this kind of standards till 1200 mm on its fully automatized CEM-TEK 1200 interferometric comparator, obtaining a repeatability of less than 40 nm. It conducts to an uncertainty U = Q [70;0.4 L/mm] nm when calibrating long gauges and to U = Q [0.1;0.4E-3 L/mm] µm for step gauges, both for a coverage factor k = 2, the last being the smallest CMC value approved by RMOs and BIPM among those offered by NMIs calibrating step gauges. It permits to reduce considerably the uncertainty linked to the process of verifying CMMs performance because the low uncertainty associated to the step calibration. Recently this comparator has been improved to obtain for steps an uncertainty closer to that of the long gauges, and updated to calibrate automatically high precision line scales by using optical methods, combining CCD, microscopy and home made software including image analysis and edge recognition. So, this equipment is probably the most universal one in the world, permitting the calibration of many different standards (long gauges, end bars, step gauges and line scales), with a repeatability of less than 40 nm and expanded uncertainties lower than 0.1 μm. On this paper CEM present some of the results obtained in international key comparisons.

Paper Details

Date Published: 20 November 2003
PDF: 13 pages
Proc. SPIE 5190, Recent Developments in Traceable Dimensional Measurements II, (20 November 2003); doi: 10.1117/12.508135
Show Author Affiliations
Emilio Prieto, Ctr. Espanol de Metrologia (Spain)
Joaquin Rodriguez, Ctr. Espanol de Metrologia (Spain)


Published in SPIE Proceedings Vol. 5190:
Recent Developments in Traceable Dimensional Measurements II
Jennifer E. Decker; Nicholas Brown, Editor(s)

© SPIE. Terms of Use
Back to Top