Share Email Print
cover

Proceedings Paper

Fine gold grating fabrication on glass plate by imprint lithography
Author(s): Yoshihiko Hirai; Toshihiko Ushiro; Tomohiro Kanakugi; Takashi Matsuura
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In this paper, fabrication of a fine gold grating on glass substrate is demonstrated using imprint lithography for optical elements. A Si mold with fine grating patterns is prepared using conventional IC’s process. The line widths of the gratings are varied from 1.0μm to 200nm. About 20nm thick Si3N4 film is coated on the mold surface by LP-CVD to improve hardness of the mold. The Si mold is pressed to a gold film on a glass substrate at room temperature. To eliminate fatal fracture of the sample in pressing, the form of the sample is just aligned to the mold to avoid stress concentration at the mold edges. The gold film is plastically deformed and fine gold grating with 200nm in line width and 300nm in height is successfully fabricated on the glass plate. The cross sectional profile of the gold pattern is fine rectangular shape. Using room temperature direct imprint lithography, metal gratings are successfully fabricated on a glass plate. This method is a promising way to fabricate fine micro optical elements by low cost.

Paper Details

Date Published: 15 October 2003
PDF: 8 pages
Proc. SPIE 5220, Nanofabrication Technologies, (15 October 2003); doi: 10.1117/12.505408
Show Author Affiliations
Yoshihiko Hirai, Osaka Prefecture Univ. (Japan)
Toshihiko Ushiro, Sumitomo Electric Industries, Ltd. (Japan)
Tomohiro Kanakugi, Osaka Prefecture Univ. (Japan)
Takashi Matsuura, Sumitomo Electric Industries, Ltd. (Japan)


Published in SPIE Proceedings Vol. 5220:
Nanofabrication Technologies
Elizabeth A. Dobisz, Editor(s)

© SPIE. Terms of Use
Back to Top