Share Email Print
cover

Proceedings Paper

Comparison of new film nozzle with standard nozzle for aqueous puddle developing of photomasks
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

With shrinking feature sizes there is a growing demand for improved uniformity values and defect levels especially for aqueous develop during photomask processing. Standard nozzle systems with discrete dispense channels for applying the developer medium onto the photomask surface may cause non-uniformities. This results in characteristic imprints in CD-uniformity reflecting the nozzle design used during the develop process step. These can lead on the one hand to an increased number and various types of defects and on the other hand to variations in CD-uniformity. A new puddle nozzle design for the STEAG HamaTech's ASP5500 has been developed to address this issue. Instead of discrete dispense holes the developer medium is applied onto the substrate surface by a full-width film. This media film is applied uniform across the substrate and has low impact onto the photomask surface. By combining the new nozzle design with gas-less high volume dispense pumps a very uniform and defect-free dispense can be achieved. The uniformity and defect performance of the new film nozzle will be presented and compared to a standard dispense nozzle system. The study has been done on masks with Chemically Amplified Resist (CAR).

Paper Details

Date Published: 28 August 2003
PDF: 7 pages
Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); doi: 10.1117/12.504190
Show Author Affiliations
Christian Buergel, Infineon Technologies AG (Germany)
Werner Saule, STEAG HamaTech AG (Germany)
M. Strobl, Infineon Technologies AG (Germany)
Peter Dress, STEAG HamaTech AG (Germany)
Anatol Schwersenz, STEAG HamaTech AG (Germany)
Martin Tschinkl, Infineon Technologies AG (Germany)


Published in SPIE Proceedings Vol. 5130:
Photomask and Next-Generation Lithography Mask Technology X
Hiroyoshi Tanabe, Editor(s)

© SPIE. Terms of Use
Back to Top