Share Email Print
cover

Proceedings Paper

Improvements of welding characteristics of aluminum alloys with YAG laser and TIG arc hybrid system
Author(s): Shigeki Fujinaga; Ryoji Ohashi; Seiji Katayama; Akira Matsunawa
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In high power YAG laser welding of steels, a rectangularly modulated beam with high peak power is usually used to get deep penetration. On the other hand, many spatters and solidification cracks are generated when some aluminum alloys are welded with a rectangularly modulated beam because of its high heat conductivity, high reflectivity, low surface tension, large contraction, wide solidification temperature range, etc. Therefore, a properly modulated beam or a continuous beam is usually used in aluminum alloy welding, although the penetration depth is shallow. In this research, sinusoidal wave or rectangularly modulated wave of YAG laser combined with TIG arc was tried to improve the weldability of A6061 aluminum alloy. As a result, when TIG arc was superimposed behind the YAG laser beam, deeply penetrated weld beads with good surface appearances were produced without spatter losses and cracks.

Paper Details

Date Published: 3 March 2003
PDF: 6 pages
Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); doi: 10.1117/12.497795
Show Author Affiliations
Shigeki Fujinaga, Advanced Materials Processing Institute (Japan)
Ryoji Ohashi, Advanced Materials Processing Institute (Japan)
Seiji Katayama, Osaka Univ. (Japan)
Akira Matsunawa, Osaka Univ. (Japan)


Published in SPIE Proceedings Vol. 4831:
First International Symposium on High-Power Laser Macroprocessing
Isamu Miyamoto; Kojiro F. Kobayashi; Koji Sugioka; Reinhart Poprawe; Henry Helvajian, Editor(s)

© SPIE. Terms of Use
Back to Top