Share Email Print
cover

Proceedings Paper

Subfield distortion of an EPL stencil mask
Author(s): Hiroshi Takenaka; Hiroshi Yamashita; Kaoru Koike; Masaki Yamabe
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

EPL (Electron Projection Lithography) is one of viable candidates for the NGL (Next Generation Lithography) used for the 65nm technology node and below. EPL uses the membrane mask with grillage structure to reinforce the membrane area. The NGL poses stringent requirements to mask accuracy. The most severe problem of membrane mask is IP (Image Placement) accuracy. In this study, distortion characteristics of an EPL stencil mask are analyzed by FEM (Finite Element Method). Its dependence on the grillage structure and the distribution of pattern density is presented. The distortion of the wet-etched wide grillage is negligible compared to the required IP accuracy. However, the distortion of the dry-etched narrow grillage cannot be negligible, which exceeds 5nm. The accumulation of the distortion will deteriorate the IP accuracy. The non-uniform distribution causes much larger distortion in membrane than the uniform one, which is quite unacceptable for the 65nm technology node and below. Improvement of the IP accuracy by the correction using an EPL optical system is also evaluated. The EPL optical system can reduce the distortion caused by the uniform distribution. However, the large distortion caused by the non-uniform distribution cannot be corrected. EPL requires its own design rules regulating the distribution of pattern density from the view point of IP accuracy.

Paper Details

Date Published: 16 June 2003
PDF: 10 pages
Proc. SPIE 5037, Emerging Lithographic Technologies VII, (16 June 2003); doi: 10.1117/12.484980
Show Author Affiliations
Hiroshi Takenaka, Semiconductor Leading Edge Technologies, Inc. (Japan)
Hiroshi Yamashita, Semiconductor Leading Edge Technologies, Inc. (Japan)
Kaoru Koike, Semiconductor Leading Edge Technologies, Inc. (Japan)
Masaki Yamabe, Semiconductor Leading Edge Technologies, Inc. (Japan)


Published in SPIE Proceedings Vol. 5037:
Emerging Lithographic Technologies VII
Roxann L. Engelstad, Editor(s)

© SPIE. Terms of Use
Back to Top