Share Email Print
cover

Proceedings Paper

Asymmetry and thickness effects in reflective EUV masks
Author(s): Frederick T. Chen
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The use of a reflective mask in extreme ultraviolet (EUV) lithography requires illumination of the mask at a small but obliquely incident angle. This results in an inherent asymmetry in the diffraction pattern from the mask. This asymmetry results in a shift of the image at the wafer. The image shift depends on the mask structure and the exposure condition. The thicknesses of the patterned mask layers, specifically, the absorber and anti-reflection layer (ARL), are particularly important for the image formation. A rigorous approach to simulating these effects is required. In this paper, a fast frequency-domain method for simulating EUV masks with the underlying multilayer is used for the study of various mask variation effects on image placement as well as linewidth, for nested 35 nm and 25 nm lines. Results indicate that EUV radiation reflected from the mask before entering the multilayer cannot be neglected. Consequently, it is of utmost importance to maintain better than ±1 nm control of absorber thickness and ARL thickness over the entire mask, in order to minimize the CD impact of variations in reflectance swing.

Paper Details

Date Published: 16 June 2003
PDF: 11 pages
Proc. SPIE 5037, Emerging Lithographic Technologies VII, (16 June 2003); doi: 10.1117/12.483602
Show Author Affiliations
Frederick T. Chen, Intel Corp. (United States)


Published in SPIE Proceedings Vol. 5037:
Emerging Lithographic Technologies VII
Roxann L. Engelstad, Editor(s)

© SPIE. Terms of Use
Back to Top