Share Email Print

Proceedings Paper

Bonding skill between the fused-quartz mirror and the composite substrate
Author(s): Shibin Jiang; Huirong Wang; Yasi Jiang; Biao Wang; Menda Chen
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The possibility for forming fused quartz layer on the substrate of carbon fiber reinforced fused quartz (CFRFQ) was investigated by melting fused quartz powder with an oxygen-hydrogen flame, chemical vapor deposition, and sol-gel method. Many kinds of bonding methods between fused quartz mirror surfaces and CFRFQ substrates were investigated, including hot- pressing directly with the mixture of fused quartz power and carbon fibers and hot-pressing secondly by adding powder between the mirror surface and the substrate. The fused quartz block could be bonded firmly under conditions of 20kg/cm2, 1240 degree(s)C, and 5 minutes, when silica powder prepared by sol-gel method was added in the midst. There is no crystallization in the middle silica layer, and the tensile strength is large. Three specimens with a diameter of 100mm and some small ones have been fabricated by this method, and the thermal deformation stability of this type of composite reflector is better than fused quartz mirror.

Paper Details

Date Published: 1 November 1991
PDF: 5 pages
Proc. SPIE 1535, Passive Materials for Optical Elements, (1 November 1991); doi: 10.1117/12.48311
Show Author Affiliations
Shibin Jiang, Shanghai Institute of Optics and Fine Mechanics (China)
Huirong Wang, Shanghai Institute of Optics and Fine Mechanics (China)
Yasi Jiang, Shanghai Institute of Optics and Fine Mechanics (China)
Biao Wang, Shanghai Institute of Optics and Fine Mechanics (China)
Menda Chen, Shanghai Ceramics Institute (China)

Published in SPIE Proceedings Vol. 1535:
Passive Materials for Optical Elements
Gary W. Wilkerson, Editor(s)

© SPIE. Terms of Use
Back to Top