Share Email Print
cover

Proceedings Paper

Characterization of electroless nickel plating on aluminum mirrors
Author(s): Steven L. Folkman; Michael Stevens
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Electroless nickel is often plated on the surface of aluminum mirrors to improve the ability to polish the mirror surface. Electroless nickel plating can cause a bimetallic effect, creating distortion of a mirror surface if it is heated or cooled. Published data listing the thermal coefficient of expansion and Young's modulus as a function of temperature for electroless nickel is not readily available. This study examined using bimetallic bars to measure the Young's modulus and thermal coefficient of expansion of electroless nickel as it is cooled from room temperature to 100 K. A test chamber was developed which can accurately measure the rotations of a bimetallic bar as it is cooled. Elementary beam theory equations for a bimetallic beam were developed. These equations indicate that by testing beams with a variety of beam thicknesses, one should be able to determine modulus and thermal coefficient of expansion data for electroless nickel. The results show that the method fails to find accurate values. Very small measurement errors cause large changes in the modulus values. By using typical values for Young's modulus and the measured beam rotations, values for thermal coefficient of expansion for electroless nickel were obtained.

Paper Details

Date Published: 9 September 2002
PDF: 11 pages
Proc. SPIE 4771, Optomechanical Design and Engineering 2002, (9 September 2002); doi: 10.1117/12.482167
Show Author Affiliations
Steven L. Folkman, Utah State Univ. (United States)
Michael Stevens, Raytheon Co. (United States)


Published in SPIE Proceedings Vol. 4771:
Optomechanical Design and Engineering 2002
Alson E. Hatheway, Editor(s)

© SPIE. Terms of Use
Back to Top