Share Email Print
cover

Proceedings Paper

Advanced dry etching for oxide deep trench
Author(s): Yveline Gobil; Patrice Noel; Muriel Moreau; Marc van der Reijden
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

This paper is focused on the development of silicon dioxide dry etching for Microsystems application. New requirements for oxide etching have been identified; keys issues are the higher oxide thickness (several microns) and the different design rules (large open areas, isolated patterns). To achieve these requirements, advanced oxide etching processes have been developed in conventional reactor using either photoresist or hard mask. The effects of several process parameters on etch rate, selectivity, oxide pattern profile have been investigated. When using a photoresist mask, the major process limitation is caused by the oxide to photoresist selectivity. Straight profiles may only be obtained if the polymerisation on the side-walls is well-controlled. So, a compromise has to be made between etch rate, oxide to mask selectivity and pattern profiles. The use of hard mask leads to achieve excellent profile control with very high aspect ratio. But, gas chemistry and process parameters such as pressure, total gas flow and chemistry have to be precisely adjusted in order to avoid the aspect ratio dependant etching in narrow patterns. Vertical profiles in high aspect ratio features can be achieved but lateral oxide erosion have to be drastically controlled.

Paper Details

Date Published: 15 January 2003
PDF: 11 pages
Proc. SPIE 4979, Micromachining and Microfabrication Process Technology VIII, (15 January 2003); doi: 10.1117/12.478280
Show Author Affiliations
Yveline Gobil, CEA-LETI (France)
Patrice Noel, CEA-LETI (France)
Muriel Moreau, CEA-LETI (France)
Marc van der Reijden, Applied Materials Europe (Netherlands)


Published in SPIE Proceedings Vol. 4979:
Micromachining and Microfabrication Process Technology VIII
John A. Yasaitis; Mary Ann Perez-Maher; Jean Michel Karam, Editor(s)

© SPIE. Terms of Use
Back to Top