Share Email Print

Proceedings Paper

Modification of boundaries conditions in the FDTD algorithm for EUV mask modeling
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Rigorous modeling of diffraction from the mask is one of the most critical points in the extension of lithography simulation from its traditional spectral range between 150 and 500 nm into the area of extreme ultraviolet (EUV) between 10 and 15 nm. A typical EUV mask is made of a reflective multilayer (Mo/Si or Mo/Be for example) deposited on a substrate. Above the multilayer, a buffer layer acts as an etch stopper, and an absorber is used for the mask pattern. If we limit our scope to layers without defect, most of the mask parts can actually be described by analytical methods such as transfer matrices. Therefore we decided to split the mask into two parts : the first part includes the absorber and the buffer layer and it will be studied using a finite-difference time-domain (FDTD) algorithm, the second part includes the reflective multilayer and the substrate and it will be simply described by transfer matrices.

Paper Details

Date Published: 1 August 2002
PDF: 10 pages
Proc. SPIE 4754, Photomask and Next-Generation Lithography Mask Technology IX, (1 August 2002); doi: 10.1117/12.476992
Show Author Affiliations
Alexandre Vial, Fraunhofer Institute for Integrated Circuits (Germany)
Andreas Erdmann, Fraunhofer Institute for Integrated Circuits (Germany)
Thomas Schmoeller, SIGMA-C GmbH (Germany)
Christian K. Kalus, SIGMA-C GmbH (Germany)

Published in SPIE Proceedings Vol. 4754:
Photomask and Next-Generation Lithography Mask Technology IX
Hiroichi Kawahira, Editor(s)

© SPIE. Terms of Use
Back to Top