Share Email Print
cover

Proceedings Paper

Application of AlSi-based materials on approach of chemical stability of embedded layer for bilayer attenuated phase-shifting mask in 193-nm lithography
Author(s): Cheng-Ming Lin; Wen-An Loong
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

AlSi-based films could be formed by a combination of transparent chemical compositions and absorbing elements. When the oxide structure increased with the increasing of atomic percentage of oxygen, the n of AlSixOy appeared to increase while k appeared to decrease in 193 nm. The saturation of formation of AlN and Si3N4 in AlSixNy was observed about 4.8 sccm N2 flow rate. The correlation between optical properties and chemical compositions of AlSi-based films has been described, therefore, the chemical stability of embedded material could be approached. Top layer film with saturation of AlN, Si3N4 or Al2O3, SiO2 could provide better chemical stability. Bottom layer with suitable mount of Al and Si chemical structure could provide enough light absorption. With proper combination of top and bottom layer AlSixOy and AlSixNy embedded material, the optical properties of bi-layer attenuated phase-shifting mask could kept in the range of high transmittance. The 0.18-micrometers -line/space NEB-22 resist pattern exposed by e-beam writer on AlSixOy embedded layer has good resolution. Due to good resist profile, the 0.3-micrometers -line/space etched pattern of bi-layer AlSixOy was also successfully carried out.

Paper Details

Date Published: 1 August 2002
PDF: 9 pages
Proc. SPIE 4754, Photomask and Next-Generation Lithography Mask Technology IX, (1 August 2002); doi: 10.1117/12.476985
Show Author Affiliations
Cheng-Ming Lin, Taiwan Semiconductor Manufacturing Co., Ltd. (Taiwan)
Wen-An Loong, National Chiao Tung Univ. (Taiwan)


Published in SPIE Proceedings Vol. 4754:
Photomask and Next-Generation Lithography Mask Technology IX
Hiroichi Kawahira, Editor(s)

© SPIE. Terms of Use
Back to Top