Share Email Print
cover

Proceedings Paper

Accuracy of laser cutting and its influence on the mechanical behavior of stents
Author(s): Carine Gachon; Patrick Delassus; Peter McHugh
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A coronary stent is a mechanical device designed to open arteries that have been occluded. The manufacturing of stents involves the laser-cutting of specific designs in stainless steel tubes. In order to determine the mechanical behaviour of stents, tensile tests are performed on straight beams. The tensile test specimens are laser-cut into the same tubes as used in the manufacturing of stents. The hardening curves obtained show that the yield stress increases when the width of the struts decreases, whereas the breaking point increases when the width increases. In order to understand this phenomenon, the role of laser-cutting is investigated. Firstly, it is shown that the heat-affected-zone, associated with laser-cut items, is very small compared to the size of the specimen. Therefore, the influence of the heat-affected-zone is considered as negligible. The inaccuracy of laser-cutting is then studied by measuring a succession of straight beams. A difference in width between the two extremities of the strut is observed. The error increases when the width of the beam decreases. An F.E.A analysis of the tensile test shows a stress concentration at the smaller extremity, explaining why the true strain at breaking point decreases with the width of the struts.

Paper Details

Date Published: 27 August 2003
PDF: 8 pages
Proc. SPIE 4876, Opto-Ireland 2002: Optics and Photonics Technologies and Applications, (27 August 2003); doi: 10.1117/12.476032
Show Author Affiliations
Carine Gachon, Galway-Mayo Institute of Technology (Ireland)
Patrick Delassus, Galway-Mayo Institute of Technology (Ireland)
Peter McHugh, National Univ. of Ireland Galway (Ireland)


Published in SPIE Proceedings Vol. 4876:
Opto-Ireland 2002: Optics and Photonics Technologies and Applications
Vincent Toal; Norman Douglas McMillan; Gerard M. O'Connor; Eon O'Mongain; Austin F. Duke; John F. Donegan; James A. McLaughlin; Brian D. MacCraith; Werner J. Blau, Editor(s)

© SPIE. Terms of Use
Back to Top