Share Email Print
cover

Proceedings Paper

Visible LED alternatives for high-radiance applications
Author(s): Eric H. Altendorf
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Laser diodes are used in high radiance applications, requiring spatially and angularly localized optical power, in order to minimize system size, cost, and power requirements. For applications requiring visible wavelengths (400nm to 700nm), AlInGaP laser diodes are utilized for wavelengths between 630nm and 650nm, and recently InGaN-based laser diodes spanning the violet to blue spectral range (400nm to 450nm) have become available, with longer wavelength devices being actively developed. It is not clear, however, when reliable laser diodes emitting in the green to yellow portion of the visible spectrum (>500nm) will be realized. In addition, single mode laser diodes required for high radiance applications typically exhibit speckle effects, are temperature sensitive, require non-linear drive electronics, and can be effected by optical feedback. High radiance LEDs with appropriate emitter dimensions can be used in place of laser diodes provided that moderate coherence and power levels are acceptable. This article examines the general dependencies of beam focusing, collimation, and coherence, on LED emitter size and radiance. Specific model examples are considered, using parameters consistent with typical laser diode collimating lenses. Edge emitting LEDs or EELEDs used for miniature scanned displays are described as high radiance LEDs suitable for other applications requiring collimation, partial coherence, or localized irradiance.

Paper Details

Date Published: 3 July 2003
PDF: 13 pages
Proc. SPIE 4996, Light-Emitting Diodes: Research, Manufacturing, and Applications VII, (3 July 2003); doi: 10.1117/12.475719
Show Author Affiliations
Eric H. Altendorf, Micro Encoder, Inc. (United States)


Published in SPIE Proceedings Vol. 4996:
Light-Emitting Diodes: Research, Manufacturing, and Applications VII
E. Fred Schubert; H. Walter Yao; Kurt J. Linden; Daniel J. McGraw, Editor(s)

© SPIE. Terms of Use
Back to Top