Share Email Print
cover

Proceedings Paper

Simple focus monitoring by eccentric illumination aperture
Author(s): Shuji Nakao; Shinroku Maejima; Naohisa Tamada; Shigenori Yamashita; Atsushi Ueno; Junji Miyazaki; Akira Tokui; Kouichirou Tsujita; Ichiriou Arimoto
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Simple focus monitoring method has been successfully developed by application of a special illumination aperture, which generates oblique illumination beam. By this method, very high sensitive focus monitoring has been achieved in a current stepper. In the stop of the illumination aperture, an opening is located at eccentric position near pupil edge. Then, illumination beam obliquely incidents to mark pattern on mask. Because of this configuration of illumination beam, imaging is carried out with oblique beams on wafer. As a result, imaging becomes non-telecentric. That is, image formed by this illumination laterally shifts almost proportional to focal deviation. To measure the lateral pattern shift, box-in-box mark is formed by double exposure. Inner box is formed by the oblique illumination in the first exposure and outer box is formed by conventional low coherent illumination in the second exposure overlaying inner box by stepping of wafer. Then, relative displacement of inner box to outer box is measured by commercially available overlay measurement system. Since sine of landing angle of imaging beams is approximately NA*sigma, which is over approximately 0.50 in a current stepper, the focus sensitivity, which is defined by a ratio of lateral pattern shift per unit defocus, may become approximately 0.50. Because resolution of lateral pattern shift is approximately 2 nm in current overlay measurement, the resolution of focus sensing becomes very high of approximately several nm.

Paper Details

Date Published: 30 July 2002
PDF: 9 pages
Proc. SPIE 4691, Optical Microlithography XV, (30 July 2002); doi: 10.1117/12.474625
Show Author Affiliations
Shuji Nakao, Mitsubishi Electric Corp. (Japan)
Shinroku Maejima, Mitsubishi Electric Corp. (Japan)
Naohisa Tamada, Mitsubishi Electric Corp. (Japan)
Shigenori Yamashita, Mitsubishi Electric Corp. (Japan)
Atsushi Ueno, Mitsubishi Electric Corp. (Japan)
Junji Miyazaki, Mitsubishi Electric Corp. (Japan)
Akira Tokui, Mitsubishi Electric Corp. (Japan)
Kouichirou Tsujita, Mitsubishi Electric Corp. (Japan)
Ichiriou Arimoto, Mitsubishi Electric Corp. (Japan)


Published in SPIE Proceedings Vol. 4691:
Optical Microlithography XV
Anthony Yen, Editor(s)

© SPIE. Terms of Use
Back to Top