Share Email Print
cover

Proceedings Paper

New AFM imaging for an in-line LSI process monitor
Author(s): Sumio Hosaka; Takafumi Morimoto; Hiroshi Kuroda; Yasushi Minomoto; Yukio Kembo; Hirokazu Koyabu
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

New imaging technique in AFM has been developed to suppress bending of the sharpened probe during scanning. After analyzing the bending of probe, it is clear that the bending is caused by response of servo control and slipping of the probe on the slope. It is needed that we do not scan the probe under contact of it on a sample surface for friction- free and we approach it to the surface at a contact force of < 10nN for slip-free. The technique controls the probe such that approaching and gap-controlling are done without scanning after only one step xy-scanning is competed, and the xy-scanning is done without servo controlling after lifting the probe up from the sample surface. This technique permits to use very sharped and slim probe and to observe a steep structure such as a dry-etched groove and hole, and a photoresist pattern with a high aspect ratio faithfully. We can clarify that it is possible to apply this technique to monitoring the steep structures as an in-line process monitor in the LSI process without cracking the wafer.

Paper Details

Date Published: 16 July 2002
PDF: 8 pages
Proc. SPIE 4689, Metrology, Inspection, and Process Control for Microlithography XVI, (16 July 2002); doi: 10.1117/12.473488
Show Author Affiliations
Sumio Hosaka, Gunma Univ. (Japan)
Takafumi Morimoto, Hitachi Kenki Fine Tech, Co. Ltd. (Japan)
Hiroshi Kuroda, Hitachi Kenki Fine Tech, Co. Ltd. (Japan)
Yasushi Minomoto, Hitachi Kenki Fine Tech, Co. Ltd. (Japan)
Yukio Kembo, Hitachi Kenki Fine Tech, Co. Ltd. (Japan)
Hirokazu Koyabu, Hitachi High-Technologies Corp. (Japan)


Published in SPIE Proceedings Vol. 4689:
Metrology, Inspection, and Process Control for Microlithography XVI
Daniel J. C. Herr, Editor(s)

© SPIE. Terms of Use
Back to Top