Share Email Print

Proceedings Paper

Application of chirped fiber Bragg grating sensors for damage identification in composites
Author(s): Nobuo Takeda; Yoji Okabe; Ryohei Tsuji; Shin-ichi Takeda
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Chirped fiber Bragg grating (FBG) sensors were applied for the identification of damages in carbon fiber reinforced plastic (CFRP) laminates since the reflection spectrum from a chirped FBG was expressed as a function of the position along the grating. First, for the identification of crack locations in the 90 degree(s) ply of cross-ply laminates, chirped FBG sensors, whose grating length and spectrum width were 50mm and about 5nm respectively, were embedded in CFRP cross-ply laminates, and the reflection spectra were measured after tensile loadings to the laminates. As a result, the spectra had dips corresponding to locations of transverse cracks. This change in the form of the spectrum was also confirmed by a theoretical calculation. Hence, the crack locations could be identified from the form of the spectrum. Secondly, this technique was applied to the identification of the delamination originating from a tip of a transverse crack in a cross-ply laminate. Since theoretical calculations indicated that the reflection spectrum changed its form corresponding to the progress of the delamination, it was also found that the chirped FBG sensor could be applied to the identification of the length and position of the delamination.

Paper Details

Date Published: 27 June 2002
PDF: 12 pages
Proc. SPIE 4694, Smart Structures and Materials 2002: Smart Sensor Technology and Measurement Systems, (27 June 2002); doi: 10.1117/12.472608
Show Author Affiliations
Nobuo Takeda, Univ. of Tokyo (Japan)
Yoji Okabe, Univ. of Tokyo (Japan)
Ryohei Tsuji, Univ. of Tokyo (Japan)
Shin-ichi Takeda, Univ. of Tokyo (Japan)

Published in SPIE Proceedings Vol. 4694:
Smart Structures and Materials 2002: Smart Sensor Technology and Measurement Systems
Daniele Inaudi; Eric Udd, Editor(s)

© SPIE. Terms of Use
Back to Top