Share Email Print
cover

Proceedings Paper

Mechanical modeling of the reticle and chuck for EUV lithography
Author(s): Carl J. Martin; Andrew R. Mikkelson; Richard O. Tejeda; Roxann L. Engelstad; Edward G. Lovell; Kenneth L. Blaedel; Andre A. Claudet
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The reflective reticles used for extreme ultraviolet (EUV) lithography are subject to the stringent image placement and flatness requirements for 70 nm and smaller feature sizes. Stresses in the reflective multilayer coatings can produce substantial bowing of the reticle, and variations in the flatness and thickness of the reticle substrate, as well as entrapped debris particles, can contribute to flatness errors on the patterned surface after reticle chucking. Reticles will also be subjected to high stage accelerations and thermal loadings during exposure. The chuck in the exposure tool will be required to clamp the reticle flat, crush entrapped debris, remove absorbed EUV energy, and prevent slippage during stage accelerations. Additionally, the thermal and structural behavior of the chuck will influence the reticle response, and thus the reticle and chuck must be considered as a system. In order to determine reticle and chucking requirements, finite element models have been developed to analyze many of the key issues in the mechanical design of the reticle and chuck. The analyses are being used to support the development of reticle and chuck standards for EUV lithography.

Paper Details

Date Published: 1 July 2002
PDF: 11 pages
Proc. SPIE 4688, Emerging Lithographic Technologies VI, (1 July 2002); doi: 10.1117/12.472290
Show Author Affiliations
Carl J. Martin, Univ. of Wisconsin/Madison (United States)
Andrew R. Mikkelson, Univ. of Wisconsin/Madison (United States)
Richard O. Tejeda, Univ. of Wisconsin/Madison (United States)
Roxann L. Engelstad, Univ. of Wisconsin/Madison (United States)
Edward G. Lovell, Univ. of Wisconsin/Madison (United States)
Kenneth L. Blaedel, Lawrence Livermore National Lab. (United States)
Andre A. Claudet, Lawrence Livermore National Lab. (United States)


Published in SPIE Proceedings Vol. 4688:
Emerging Lithographic Technologies VI
Roxann L. Engelstad, Editor(s)

© SPIE. Terms of Use
Back to Top