Share Email Print
cover

Proceedings Paper

Florinated polyimide for low-loss optical waveguides at 1.55 um
Author(s): Shigeki Sakaguchi; Yoshihiro Moroi; Hidehisa Nanai; Takashi Hayamizu; Yuji Yamamoto; Kazuhiko Maeda
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Fluorinated polyimide (FPI) is an attractive material for fabricating low-loss optical waveguides at 1.55 micrometers , because of its superior optical and thermal properties. Although FPI planar lightwave circuits (PLCs) are usually fabricated on silicon substrate, such PLCs exhibit relatively high polarization dependence and high transmission loss compared with those of silica PLCs. Use of an FPI substrate overcomes these problems that mainly originate from the difference in thermal expansion coefficient between FPI and silicon. It improves the optical property of FPI waveguides, e.g., the transmission loss and polarization dependent loss for straight waveguides reduce to less than 0.3 dB/cm and 0.1 dB, respectively, in the 1.55-micrometers band. The use of FPI substrates will enable the fabrication of high-optical-quality FPI PLCs such as 1x8 splitters.

Paper Details

Date Published: 7 June 2002
PDF: 9 pages
Proc. SPIE 4653, WDM and Photonic Switching Devices for Network Applications III, (7 June 2002); doi: 10.1117/12.469654
Show Author Affiliations
Shigeki Sakaguchi, Central Glass Co., Ltd. (Japan)
Yoshihiro Moroi, Central Glass Co., Ltd. (United States)
Hidehisa Nanai, Central Glass Co., Ltd. (Japan)
Takashi Hayamizu, Central Glass Co., Ltd. (Japan)
Yuji Yamamoto, Central Glass Co., Ltd. (Japan)
Kazuhiko Maeda, Central Glass Co., Ltd. (Japan)


Published in SPIE Proceedings Vol. 4653:
WDM and Photonic Switching Devices for Network Applications III
Ray T. Chen; Joseph C. Chon, Editor(s)

© SPIE. Terms of Use
Back to Top