Share Email Print
cover

Proceedings Paper

Characterization of repairs to KrF 300-mm wafer printability for 0.13-um design rule with attenuated phase-shifting mask
Author(s): William Chou; Tsung Chen; Will Tseng; Peter Huang; Chin Chih Tseng; Mars Chung; Dick Wang; Norman Huang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

For sub-0.13um lithography, attenuated phase shifting mask (AttPSM) with optical proximity correction (OPC) is reported as one of the potential methods to achieve manufacturable process by using 248nm exposure wavelength. Unfortunately, the low-k1 imaging process in 130nm lithography imposes much more stringent requirements on defect repair, especially on AttPSM reticle. Therefore, the imperfect repairs will have a significant impact on wafer process window due to quartz damage and phase distortion caused by Ga+ ion stain removal and added carbon material, respectively. In this paper, we have prepared AttPSM test masks having programmed defects with various opaque defects. Each defect area was inspected with KLA-Tencor's SLF27 inspection system to acquire defect coordinates and image, simulated with AIMS to assess the intensity and transmission loss induced by repair process. All of masks were made by DuPont Photomasks Taiwan (DPT) by using the Jbx9000MV2 E-beam writer and dry Chrome etch process. All lithographic experiments were performed on 300mm wafer using high NA ASML AT750S scanner and high contrast CAR resist. In this study, we have focused on the impact of quartz damage and phase error on wafer process window by comparing the wafer CD and pattern profile through focus. In order to establish a efficient way to perform effective judgement on repair defect between mask shop and wafer fab, both AIMS and wafer results will be compared and correlated.

Paper Details

Date Published: 27 December 2002
PDF: 11 pages
Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); doi: 10.1117/12.467314
Show Author Affiliations
William Chou, United Microelectronics Corp. (Taiwan)
Tsung Chen, United Microelectronics Corp. (Taiwan)
Will Tseng, United Microelectronics Corp. (Taiwan)
Peter Huang, United Microelectronics Corp. (Taiwan)
Chin Chih Tseng, DuPont Photomasks Taiwan Ltd. (Taiwan)
Mars Chung, DuPont Photomasks Taiwan Ltd. (Taiwan)
Dick Wang, DuPont Photomasks Taiwan Ltd. (Taiwan)
Norman Huang, DuPont Photomasks Taiwan Ltd. (Taiwan)


Published in SPIE Proceedings Vol. 4889:
22nd Annual BACUS Symposium on Photomask Technology
Brian J. Grenon; Kurt R. Kimmel, Editor(s)

© SPIE. Terms of Use
Back to Top