Share Email Print

Proceedings Paper

Automatic method for inspecting plywood shear samples
Author(s): R. Richard Avent; Richard W. Conners
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A plywood panel is composed of several layers of wood bonded together by glue. The adhesive integrity of the glue formulation employed must surpass the structural integrity of wood used to make the panel. The American Plywood Association (APA) regularly tests plywood from manufacturing plants to ensure that this performance requirement is met. One of the procedures used is to saw a panel into a number of 1 X 3- 1/4 inch blocks called samples. These samples are then subjected to a number of treatments to simulate natural aging. The treated samples are then sheared into two halves. A 1 X 1 inch area on each of the two halves is then visually inspected to determine the percent wood failure that occurred during the shear. Roughly speaking a region of solid wood or a region of wood fibers embedded in glue is considered to be a region of wood failure while a region of glue is considered to be a region of glue failure. If the percent wood failure of sample from a significant number or panels from a plant is too low, the right to use the APA trademarks is withdrawn. The number of samples inspected annually by the APA is in the millions. The human inspectors are well trained, typically having years of experience, and are regularly tested. As in any human endeavor, the inspectors are subject to fatigue, boredom, etc. For these and other reasons an automatic inspection system could aid the APA in better performing its regulatory role.

Paper Details

Date Published: 1 March 1991
PDF: 15 pages
Proc. SPIE 1468, Applications of Artificial Intelligence IX, (1 March 1991); doi: 10.1117/12.45472
Show Author Affiliations
R. Richard Avent, Virginia Polytechnic Institute and State Univ. (United States)
Richard W. Conners, Virginia Polytechnic Institute and State Univ. (United States)

Published in SPIE Proceedings Vol. 1468:
Applications of Artificial Intelligence IX
Mohan M. Trivedi, Editor(s)

© SPIE. Terms of Use
Back to Top