Share Email Print
cover

Proceedings Paper

Use of magnetorheological finishing (MRF) to relieve residual stress and subsurface damage on lapped semiconductor silicon wafers
Author(s): Steven R. Arrasmith; Stephen D. Jacobs; John C. Lambropoulos; Alexander Maltsev; Donald Golini; William I. Kordonski
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Magnetorheological finishing (MRF) is a novel process demonstrated to be effective for fine figure control and polishing of a variety of optical glasses and crystals. This paper discusses the use of MRF to stress relieve the surfaces of single crystal silicon wafers, of the type used in the semiconductor industry to fabricate integrated circuits. One hundred-mm diameter silicon wafers with a <111> crystallographic orientation were loose abrasive lapped with three different sizes of alumina abrasive to introduce compressive surface stress. The stress generated in the wafer surface was characterized by interferometrically monitoring the bending of the wafer due to the Twyman effect. The thickness of the subsurface damage (SSD) layer was characterized using a dimpling method with a fixture developed at COM. Subsequent polishing by MRF was found to be effective in removing the subsurface damage and associated residual stress generated in the wafer surface during loose abrasive lapping.

Paper Details

Date Published: 27 December 2001
PDF: 9 pages
Proc. SPIE 4451, Optical Manufacturing and Testing IV, (27 December 2001); doi: 10.1117/12.453627
Show Author Affiliations
Steven R. Arrasmith, Univ. of Rochester (United States)
Stephen D. Jacobs, Univ. of Rochester (United States)
John C. Lambropoulos, Univ. of Rochester (United States)
Alexander Maltsev, Univ. of Rochester (United States)
Donald Golini, QED Technologies, Inc. (United States)
William I. Kordonski, QED Technologies, Inc. (United States)


Published in SPIE Proceedings Vol. 4451:
Optical Manufacturing and Testing IV
H. Philip Stahl, Editor(s)

© SPIE. Terms of Use
Back to Top