Share Email Print
cover

Proceedings Paper

Optical designs for improving performances of aerosol sensing micro-pulse lidars
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

This paper addresses current design improvement issues of aerosol sensing Micro-Pulse Lidars (MPL). MPLs are designed to adhere to eye-safety restrictions while achieving acceptable signal to noise ratios (SNR). This method is realized by reducing the per pulse energy of the laser and employing a narrow receiver field-of-view (FOV). Due to the narrow FOV requirement, only a partial return signal is measured until the laser beam propagates a distance where the receiver FOV fully overlaps the laser beam. This is called the full overlap distance and is usually 4 km or more for reasonable MPL parameters. Accurate MPL measurements are typically only possible beyond this distance. The fraction of laser beam energy that is within the receiver FOV versus range is called the overlap function. The causes of the overlap function are discussed. An overlap related problem with current MPL designs is that the majority of the atmospheric aerosols are located below an altitude of 4 km to 5 km, within the partial overlap region. Another problem is that the overlap function is not thermally constant. This introduces errors in the experimentally derived overlap function and system constant factor, ultimately leading to errors in the retrieved lidar signal.

Paper Details

Date Published: 9 January 2002
PDF: 11 pages
Proc. SPIE 4484, Lidar Remote Sensing for Industry and Environment Monitoring II, (9 January 2002); doi: 10.1117/12.452790
Show Author Affiliations
Manuel Rubio, Optical Sciences Ctr./Univ. of Arizona (United States)
John A. Reagan, Optical Sciences Ctr./Univ. of Arizona (United States)


Published in SPIE Proceedings Vol. 4484:
Lidar Remote Sensing for Industry and Environment Monitoring II
Upendra N. Singh, Editor(s)

© SPIE. Terms of Use
Back to Top