Share Email Print
cover

Proceedings Paper

Saw-tooth refractive x-ray optics with sub-micron resolution
Author(s): Bjorn Cederstrom; Carolina Ribbing; Mats Lundqvist
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Saw-tooth refractive x-ray lenses have been used to focus a synchrotron beam to sub-μm line width. These lenses are free from spherical aberration and work in analogy with 1-D focusing parabolic compound refractive lenses. However, the focal length can be varied by a simple mechanical procedure. Silicon lenses were fabricated by wet anisotropic etching, and epoxy replicas were molded from the silicon masters. Theses lenses provided 1-D intensity gains up to a factor of 40 and the smallest focal line width was 0.74 μm, very close to the theoretical expectation. Two crossed lenses were put in series to obtain 2-D focusing and the 80 μm by 275 μm source was imaged to 1.0 μm by 5.4 μm. Beryllium lenses were fabricated using conventional computer-controlled milling. The focal line width was 1.7 μm, nearly 3 times larger than predicted by theory. This can be attributed to large surface roughness and a bent lens shape.

Paper Details

Date Published: 21 November 2002
PDF: 12 pages
Proc. SPIE 4783, Design and Microfabrication of Novel X-Ray Optics, (21 November 2002); doi: 10.1117/12.452288
Show Author Affiliations
Bjorn Cederstrom, Royal Institute of Technology (Sweden)
Carolina Ribbing, Uppsala Univ. (Sweden)
Mats Lundqvist, Royal Institute of Technology (Sweden)


Published in SPIE Proceedings Vol. 4783:
Design and Microfabrication of Novel X-Ray Optics
Derrick C. Mancini, Editor(s)

© SPIE. Terms of Use
Back to Top