Share Email Print
cover

Proceedings Paper

Advantages of using the CAR for photomask manufacturing
Author(s): Takehiro Kondoh; Masamitsu Itoh; Rikiya Taniguchi; Kyoh Ohtsubo; Mari Sakai; Hidehiro Watanabe
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

This report shows characteristics of the chemical amplified positive-tone resist (CAR) we have developed for 50keV electron beam (E-beam) mask writing system. The CAR includes newly developed polymer. Including the polymer, CD change is negligible small even if exposed mask is left in vacuum for dozens of hour. 0.4, 0.3, 0.2 micrometers L&S resist pattern profiles at a dose of 7.5micrometers C/cm2 and Cr pattern profiles after reactive ion etching are printed. Dependence on PEB temperature is 3.4 nm / degree(s)C. As post coating delay effect (PCD), CD change can not be observed for 53 days. And characteristics of the CAR were compared with that of ZEP7000 (Nippon Zeon Co., Ltd.). Dose latitude of the CAR is about two times of that of the other. Writing time of photomask with the CAR is about half of that the other. Above mentioned, the CAR has ability for photomasks manufacturing. So, we have succeed in making 0.18micrometers design rule photomasks with the CAR and 50keV EB writing system.

Paper Details

Date Published: 5 September 2001
PDF: 10 pages
Proc. SPIE 4409, Photomask and Next-Generation Lithography Mask Technology VIII, (5 September 2001); doi: 10.1117/12.438349
Show Author Affiliations
Takehiro Kondoh, Toshiba Corp. (Japan)
Masamitsu Itoh, Toshiba Corp. (Japan)
Rikiya Taniguchi, Toshiba Corp. (Japan)
Kyoh Ohtsubo, Toshiba Corp. (Japan)
Mari Sakai, Toshiba Corp. (Japan)
Hidehiro Watanabe, Toshiba Corp. (Japan)


Published in SPIE Proceedings Vol. 4409:
Photomask and Next-Generation Lithography Mask Technology VIII
Hiroichi Kawahira, Editor(s)

© SPIE. Terms of Use
Back to Top