Share Email Print

Proceedings Paper

Improved resolution of thick film resist (verification by simulation)
Author(s): Yoshihisa Sensu; Atsushi Sekiguchi; Yasuhiro Miyake
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In the past there have been almost no analyses of mechanisms to achieve higher resolutions and higher aspect ratios in thick film resist processes. In this work, the authors measures the effects of water in a thick film resist on indenecarboxylic acid generation in thick film resist image formation, and studies the mechanism of resolution enhancement through hydration processes. In addition, a development rate measurement system, a system for analysis of resist reactions during exposure, and lithography simulations are employed to simulate profiles in thick film resists. Calculation results are then compared with actual resist profile. Specifically, a diazonaphthoquinone (DNQ)- novalic positive thick film resist is used; after coating to a thickness of 22micrometers and prebaking, the sample is subjected to dehydration in a vacuum desiccator, samples are prepared both immersed in Water and without such immersion, and photochemical reaction rates are measured during exposure, while also measuring development rates. From the measured results for photochemical reaction rates of the resist during exposure, the state of indenecarboxylic acid generation can be determined. The development rate data is inputted to the SOLID-C lithography simulator, thick film resist simulations are executed, and the results were compared with actual SEM observations of resist profiles. From the results of analyses of photochemical reactions during exposure, it is confirmed that differences in water quantity in the resist affect the generation o findenecarboxylic acid. Simulation results also confirms that by immersing the resist in water, the resolution is enhanced. The general trends of simulation results and actual patterning are in agreement, and it is concluded that in thick film resist, resolution is improved when water is present in the resist in sufficient quantities for idenecarboxylic acid generation.

Paper Details

Date Published: 24 August 2001
PDF: 15 pages
Proc. SPIE 4345, Advances in Resist Technology and Processing XVIII, (24 August 2001); doi: 10.1117/12.436816
Show Author Affiliations
Yoshihisa Sensu, Litho Tech Japan Corp. (Japan)
Atsushi Sekiguchi, Litho Tech Japan Corp. (Japan)
Yasuhiro Miyake, Litho Tech Japan Corp. (Japan)

Published in SPIE Proceedings Vol. 4345:
Advances in Resist Technology and Processing XVIII
Francis M. Houlihan, Editor(s)

© SPIE. Terms of Use
Back to Top