Share Email Print
cover

Proceedings Paper

Acoustic emission detection using fiber Bragg gratings
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

A systematic study of acoustic emission detection using fiber Bragg grating sensors has been carried out over the last year. In this, we attempt to use the fiber Bragg grating to sense the dynamic strain created by a passing ultrasonic wave signal. Our goal here is to see if such a sensor is possible, and if so, what the detection sensitivity and limitations will be. To answer these questions, we carried out several experiments involving the detection of simulated acoustic emission events. In the first experiment, we attach fiber Bragg grating to the surface of a piezoceramic resonator which is driven by a signal generator. We were able to detect the resulting surface vibration of the resonator up to 2.1 MHz. In the second experiment, we attach a fiber Bragg grating to the surface of an aluminum plate. We excite an acoustic wave using an ultrasonic transducer located at various positions of the aluminum plate. In this way, we demonstrated that the fiber Bragg Grating sensor is capable of picking up the signal coming from a distance (up to 30 cm) for up to 2.5 MHz. In a third experiment, we use the same fiber Bragg grating on aluminum plate set up, but set up an acoustic signal by either a gentle knock on the plate by a pin, or by breaking a pencil lead on the plate. We were able to detection acoustic emission set up by pencil lead breaking up to a frequency of 30 kHz. Higher frequency components were not detected mainly due to the limitation of available electronic equipment at this time (higher frequency band-pass filters and amplifiers. In all the above-mentioned experiments we use a match Bragg grating to demodulate the detected optical signal and use a dual channel scheme for electronic data acquisition and processing (a signal channel and a reference channel).

Paper Details

Date Published: 6 August 2001
PDF: 7 pages
Proc. SPIE 4328, Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, (6 August 2001); doi: 10.1117/12.435542
Show Author Affiliations
Ignacio M. Perez, Naval Air Warfare Ctr. (United States)
Hongliang Cui, Stevens Institute of Technology (United States)
Eric Udd, Blue Road Research (United States)


Published in SPIE Proceedings Vol. 4328:
Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials
Eric Udd; Daniele Inaudi, Editor(s)

© SPIE. Terms of Use
Back to Top