Share Email Print
cover

Proceedings Paper

In-situ health monitoring of a bonded composite patch using the strain ratio technique
Author(s): Scott D. Moss; Stephen C. Galea; Ian G. Powlesland; Michael J. Konak; Alan A. Baker
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Piezo-electric (PVDF) sensors were applied to a specifically prepared two-sided composite specimen. The specimen was fatigued with a 3Hz cyclic load until the adhesive bond between composite patch and aluminium failed. During the cyclic loading period the output from the PVDF sensors were monitored by a prototype "Smart Patch Device". The Smart Patch Device measured outputs from two PVDF sensors, one on the "patch" and one in the "far-field" from which was calculated a "Patch state of health". The Smart Patch Device successfully detected the composite patch disbonding from the aluminium. The effect of the adhesive spew fillet, which can produce significant strains in disbonded sections of patch, is considered. Finally a number of points in relation to the use of the strain ratio technique for patch state of health monitoring are elucidated..

Paper Details

Date Published: 21 March 2001
PDF: 12 pages
Proc. SPIE 4235, Smart Structures and Devices, (21 March 2001); doi: 10.1117/12.420878
Show Author Affiliations
Scott D. Moss, Defence Science and Technology Organisation (Australia)
Stephen C. Galea, Defence Science and Technology Organisation (Australia)
Ian G. Powlesland, Defence Science and Technology Organisation (Australia)
Michael J. Konak, Defence Science and Technology Organisation (Australia)
Alan A. Baker, Defence Science and Technology Organisation (Australia)


Published in SPIE Proceedings Vol. 4235:
Smart Structures and Devices
Dinesh K. Sood; Ronald Albert Lawes; Vasundara V. Varadan, Editor(s)

© SPIE. Terms of Use
Back to Top