Share Email Print
cover

Proceedings Paper

Submicrometer lithography by near-field optical microscopy
Author(s): Saulius Juodkazis; Yoshio Arisawa; Shigeki Matsuo; Hiroaki Misawa; Rolandas Tomasiunas; Juozas V. Vaitkus
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Optimization of (i) intensity of illumination and (ii) thickness of resist was made looking for the conditions when high spatial resolution could be achieved by optical near- field lithography. Standard set-up of near-field illumination through a tapered Al-coated fiber tip was employed for the exposure of positive resist OFPR-5000 (EG), which is photo-sensitive for wavelength (lambda) < 450 nm. Tip was scanned along the line at near-field conditions of constant sample-to-tip separation to produce adjustable exposure dose of the spin-coated resist film. Femtosecond, 120 fs, pulses of the power P <1 mW (at 82 MHz repetition rate) at 400 nm were coupled into a fiber (<1 m length) and delivered to the surface of the resist for illumination. The issues of NSOM fabrication using tapered Al-coated tips are addressed. To achieve a reproducible and high aspect ratio (approaching 1:1) NSOM-based lithography there should be found resists allowing to produce thin films (<100 nm) with low surface roughness (>10 nm).

Paper Details

Date Published: 8 March 2001
PDF: 6 pages
Proc. SPIE 4318, Smart Optical Inorganic Structures and Devices, (8 March 2001); doi: 10.1117/12.417618
Show Author Affiliations
Saulius Juodkazis, Univ. of Tokushima and Vilnius Univ. (Japan)
Yoshio Arisawa, Univ. of Tokushima (Japan)
Shigeki Matsuo, Univ. of Tokushima (Japan)
Hiroaki Misawa, Univ. of Tokushima (Japan)
Rolandas Tomasiunas, Vilnius Univ. (Lithuania)
Juozas V. Vaitkus, Vilnius Univ. (Lithuania)


Published in SPIE Proceedings Vol. 4318:
Smart Optical Inorganic Structures and Devices
Steponas P. Asmontas; Jonas Gradauskas, Editor(s)

© SPIE. Terms of Use
Back to Top