Share Email Print

Proceedings Paper

Robot pose correction using photogrammetric tracking
Author(s): Juergen Hefele; Claus Brenner
Format Member Price Non-Member Price
PDF $17.00 $21.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Traditionally, one of the driving forces behind the development of industry robots was the goal to replace tedious or hazardous manual work such as welding or varnishing. However, as robot prices are falling constantly, the use of robots becomes an economically sound solution in more and more applications – including areas which have nothing in common with the traditional “harsh environment” scenario. With the wider application scope, there also come more and tighter requirements, one of them certainly being accuracy. The accuracy of a robot can be asserted by measuring the position and orientation of its end effector. For this purpose there exist a number of techniques, one of them being photogrammetric measurement. Robot manufacturers have used photogrammetry since several years in order to carry out a factory calibration. However, there is a growing need for systems which are able to calibrate and constantly monitor a robot on the factory floor. This paper describes the possibilities which are offered by recent developments in sensors, image processing and close range photogrammetry. It then shows first results towards an on-line photogrammetric robot tracking system which have been obtained by a research group at the University of Stuttgart, Germany.

Paper Details

Date Published: 12 February 2001
PDF: 9 pages
Proc. SPIE 4189, Machine Vision and Three-Dimensional Imaging Systems for Inspection and Metrology, (12 February 2001); doi: 10.1117/12.417194
Show Author Affiliations
Juergen Hefele, Univ. of Stuttgart (Germany)
Claus Brenner, Univ. of Stuttgart (Germany)

Published in SPIE Proceedings Vol. 4189:
Machine Vision and Three-Dimensional Imaging Systems for Inspection and Metrology
Kevin G. Harding; John W. V. Miller; Bruce G. Batchelor, Editor(s)

© SPIE. Terms of Use
Back to Top