Share Email Print
cover

Proceedings Paper

High volume manufacturing of polymer planar waveguides via UV embossing
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A process is described here which is capable of creating very low cost single or multimode waveguides. To reuce the cost of manufacture to the lowest levels, one must move away from intensive individual processing steps such as wafer- based spin coating, lithography, and development. Here, a process is described which is inspired by the printing industry; especially the printing of raised features to form simple, low cost holograms typically used for product security. All efforts must be approached with a level of precision and engineering not typically required in the embossing industry. Precision resist masters of 12' dimension were created using commercially available photoresists and photomasks. High fidelity molds (and embossing tools) were made by replicating the master in both metal and elastomer. PET film was coated with an underclass layer which uniformly reproduced waveguide channel features. The filling process of waveguide cores proceeded through the coating of the channels followed by lamination of an overcoating. Finally, end face preparation was examined through die cutting, slitting, and laser cutting techniques.

Paper Details

Date Published: 29 November 2000
PDF: 10 pages
Proc. SPIE 4106, Linear, Nonlinear, and Power-Limiting Organics, (29 November 2000); doi: 10.1117/12.408492
Show Author Affiliations
Paul M. Ferm, Corning, Inc. (United States)
Lawrence W. Shacklette, Corning, Inc. (United States)


Published in SPIE Proceedings Vol. 4106:
Linear, Nonlinear, and Power-Limiting Organics
Manfred Eich; Christopher M. Lawson; Mark G. Kuzyk; Manfred Eich; Mark G. Kuzyk; Christopher M. Lawson; Robert A. Norwood, Editor(s)

© SPIE. Terms of Use
Back to Top