Share Email Print
cover

Proceedings Paper

Assembly of a miniature linear actuator using vision feedback
Author(s): Juergen Hesselbach; Gero Pokar
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The assembly of a miniature linear actuator is described. The actuator consists of a base plate including the stator, a runner and guides on both sides of the runner. Stator, runner and guides are micro machined, using silicon as base material. The overall dimensions of the complete actuator are approximately 9 mm x 3 mm. A parallel robot with 4-DOF and a resolution of less than 1 (mu) m is used to assemble the actuator. The robots high accuracy is reached as a result of the parallel structure of the robot in combination with linear piezo drives. In addition, an integrated vision system allows the exact positioning of the robot relative to a previously teached position. The accuracy of the vision system is about 0.25(mu) m. Communication between the robot and the vision system takes place over a high-speed RS-422 serial link. As a first assembly step the guides, which are 8 mm long and 700 (mu) m wide, have to be mounted onto the base plate, right and left to the runners track. A special focus is laid on the exact maintenance of distance and parallelism of the guides, which is assured by the vision system. If the gap between the guides is too wide, the runner can tilt above the z- axis, which causes the actuator not to work. The opposite, a too small gap, causes the runner to be stuck between the guides. The guides are handled by a SMA-actuated miniature gripper. To keep the guides in place they are fixed by droplets of glue, whic are dispensed by a micro dispenser.

Paper Details

Date Published: 11 October 2000
PDF: 8 pages
Proc. SPIE 4194, Microrobotics and Microassembly II, (11 October 2000); doi: 10.1117/12.403698
Show Author Affiliations
Juergen Hesselbach, Technical Univ. Braunschweig (Germany)
Gero Pokar, Technical Univ. Braunschweig (Germany)


Published in SPIE Proceedings Vol. 4194:
Microrobotics and Microassembly II
Bradley J. Nelson; Jean-Marc Breguet, Editor(s)

© SPIE. Terms of Use
Back to Top