Share Email Print
cover

Proceedings Paper

InAsSb and InGaAs linear and focal plane arrays
Author(s): Patrick Merken; Lars Zimmermann; Joachim John; Stefan Nemeth; Martin Gastal; Gustaaf Borghs; Chris A. Van Hoof
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Short-wave IR and mid-IR photovoltaic detector arrays consisting of In(Ga)As and InAsSb were realized. Maximum array size is 256 X 256 elements on a 25 micron pitch. The layers were grown on 3' semi-insulating GaAs substrates by MBE thereby avoiding the need for substrate removal by wafer thinning after hybridization. A reliable and uniform detector process using improved wet-etching has been developed. The citric-acid based etch has been optimized for minimum underetch such that high fill factor is achieved even with a mesa-type process. Typical RoA products at room temperature are within a factor of 2 of the theoretical limit for bulk leakage currents. The hybridization with silicon readout circuits consisted of Si-postprocessing by electroless plating or lithographic definition of Ni/Au, indium bump electroplating on the III-V chip and flip-chip integration with individual indium bumps. The indium bump process resulted in 13 micron diameter solderbumps which allows pixel pitches below 20 micron.

Paper Details

Date Published: 17 July 2000
PDF: 6 pages
Proc. SPIE 4028, Infrared Detectors and Focal Plane Arrays VI, (17 July 2000); doi: 10.1117/12.391737
Show Author Affiliations
Patrick Merken, IMEC and Royal Military Academy (Belgium)
Lars Zimmermann, IMEC (Belgium)
Joachim John, IMEC (Belgium)
Stefan Nemeth, IMEC (Belgium)
Martin Gastal, IMEC (Belgium)
Gustaaf Borghs, IMEC (Belgium)
Chris A. Van Hoof, IMEC (Belgium)


Published in SPIE Proceedings Vol. 4028:
Infrared Detectors and Focal Plane Arrays VI
Eustace L. Dereniak; Robert E. Sampson, Editor(s)

© SPIE. Terms of Use
Back to Top