Share Email Print

Proceedings Paper

Design of the science-fold mirrors for the Gemini telescopes
Author(s): Thomas Peschel; Christoph Damm; Wolfgang Heilemann
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

As a part of the Acquisition and Guidance Unit for the Gemini project a light-weight, 50 cm flat mirror has been designed at the Fraunhofer Institute for Applied Optics and Precision Mechanics in Jena as a subcontractor of the Carl Zeiss Jena company. A light-weight design of the mirror and its mount was essential since the total mass of the whole assembly including the positioning system was limited to 50 kg while interferometric quality of the mirror surface was required for arbitrary orientation. The overall surface error was below 54 nm r.m.s. while 27 nm was achieved in the central part. The mirror was fabricated from low-expansion glass ceramics to avoid thermally induced deformations. By milling pockets into its rear surface the mass of the mirror was reduced by 70%. The mirror is mounted cinematically via six solid-state hinges to three steel levers. The levers are connected to the mount frame at their centers via ball-and- sphere joints. This arrangement determines the position of the mirror uniquely while it allows for the thermal expansion of the mount frame. The position of the mirror as well as its tilt around an axis perpendicular to the optical one may be controlled a precision of 20 micrometers and 3 arcsec, respectively. The tilt axis is driven directly by two high- torque motors. To avoid an excessive power consumption of the motors the torque of the mirror head to be compensated for by a counterweight mechanism. The mirror may be deployed into the optical path using spindle driven linear rails.

Paper Details

Date Published: 20 July 2000
PDF: 7 pages
Proc. SPIE 4003, Optical Design, Materials, Fabrication, and Maintenance, (20 July 2000); doi: 10.1117/12.391534
Show Author Affiliations
Thomas Peschel, Fraunhofer-Institut fuer Angewandte Optik und Feinmechanik (Germany)
Christoph Damm, Fraunhofer-Institut fuer Angewandte Optik und Feinmechanik (Germany)
Wolfgang Heilemann, Carl Zeiss Jena GmbH (Germany)

Published in SPIE Proceedings Vol. 4003:
Optical Design, Materials, Fabrication, and Maintenance
Philippe Dierickx, Editor(s)

© SPIE. Terms of Use
Back to Top