Share Email Print
cover

Proceedings Paper

Inspection of 3D parts using high accuracy range data
Author(s): Flavio Prieto; Richard Lepage; Pierre Boulanger; Tanneguy Redarce
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The use of a laser range sensor in the 3D part digitalization process for inspection tasks allows very significant improvement in acquisition speed and in 3D measurement points density but does not equal the accuracy obtained with a coordinate measuring machine (CMM). Inspection consists in verifying the accuracy of a part related to a given set of tolerances. It is thus necessary that the 3D measurements be accurate. In the 3D capture of a part, several sources of error can alter the measured values. So, we have to find and model the most influent parameters affecting the accuracy of the range sensor in the digitalization process. This model is used to produce a sensing plan to acquire completely and accurately the geometry of a part. The sensing plan is composed of the set of viewpoints which defines the exact position and orientation of the camera relative to the part. The 3D cloud obtained from the sensing plan is registered with the CAD model of the part and then segmented according to the different surfaces. Segmentation results are used to check tolerances of the part. By using the noise model, we introduce a dispersion value for each 3D point acquired according to the sensing plan. This value of dispersion is shown as a weight factor in the inspection results.

Paper Details

Date Published: 21 March 2000
PDF: 12 pages
Proc. SPIE 3966, Machine Vision Applications in Industrial Inspection VIII, (21 March 2000); doi: 10.1117/12.380061
Show Author Affiliations
Flavio Prieto, INSA and Ecole de Technologie Superieure (France)
Richard Lepage, Ecole de Technologie Superieure (Canada)
Pierre Boulanger, National Research Council Canada (Canada)
Tanneguy Redarce, INSA (France)


Published in SPIE Proceedings Vol. 3966:
Machine Vision Applications in Industrial Inspection VIII
Kenneth W. Tobin Jr.; John C. Stover, Editor(s)

© SPIE. Terms of Use
Back to Top