Share Email Print
cover

Proceedings Paper

High-power chemical oxygen-iodine laser welding
Author(s): Tokuhiro Nakabayashi; Mikio Muro
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The present paper describes the welding characteristics with a 10 kW class Chemical Oxygen-Iodine Laser (COIL), whose wavelength is 1.32 micrometer. Bead-on-plate welding tests of 304 stainless steel plates were carried out at laser power 8.5 kW and 11 kW. Three different shielding gases (N2, Ar and He) were used through a coaxial conical shape nozzle under the lens. In COIL welding, the interaction between the laser beam and the laser induced plasma is very small because the wavelength of COIL is shorter than that of CO2 laser, so that the laser beam reaches on the workpiece without absorption by the plasma. As the result of the welding tests, the welded bead shapes did not depend on a type of the shielding gas. Radiograph and longitudinal section tests of the welded beads were carried out. When He and Ar gases were used as the shielding gas, there were several porosities. On the other hand, the use of N2 gas made no porosity. The full penetration on 10 mm thick plate was achieved in the high aspect ratio without the welding defects under the condition of laser power 8.5 kW and welding speed 1.5 m/min.

Paper Details

Date Published: 7 February 2000
PDF: 8 pages
Proc. SPIE 3888, High-Power Lasers in Manufacturing, (7 February 2000); doi: 10.1117/12.377043
Show Author Affiliations
Tokuhiro Nakabayashi, Kawasaki Heavy Industries, Ltd. (Japan)
Mikio Muro, Kawasaki Heavy Industries, Ltd. (Japan)


Published in SPIE Proceedings Vol. 3888:
High-Power Lasers in Manufacturing
Xiangli Chen; Tomoo Fujioka; Akira Matsunawa, Editor(s)

© SPIE. Terms of Use
Back to Top