Share Email Print
cover

Proceedings Paper

Plasma instability and optimum utilization of laser energy in laser materials processing
Author(s): Franz-Josef Kahlen; Hermann Emminger; Srikanth Sankaranarayanan; Aravinda Kar
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A plume consisting of vapor and ionized particles of the workpiece is usually formed during various types of laser materials processing. The process parameters such as the laser power, spot diameter, scanning speed, material properties and shielding gas affect the properties of this plume. A one- dimensional model is presented to understand the effects of the vapor-plasma plume in continuous wave (cw) laser materials processing. A model for pulsed laser materials processing is also discussed. These models are used to analyze the transmission of the laser beam through the plume and the deposition of energy on the melt pool at the substrate surface. An experimental technique described as the pinhole experiment is devised for pulsed laser operations to measure the partitioning of laser energy between the plume and workpiece and to identify the process parameter regime for efficient energy transfer from the laser beam to the workpiece. The attenuation coefficient of the vapor-plasma plume was measured during cw CO2 laser-assisted metal deposition conditions by directing a CO2 probe laser beam horizontally through the plume and determining the ratio of irradiance of the beam after and before the plume. Assuming an isotropic attenuation coefficient through the plume, the energy partitioning between the plume and workpiece was determined.

Paper Details

Date Published: 7 February 2000
PDF: 15 pages
Proc. SPIE 3888, High-Power Lasers in Manufacturing, (7 February 2000); doi: 10.1117/12.377016
Show Author Affiliations
Franz-Josef Kahlen, CREOL/Univ. of Central Florida (Thailand)
Hermann Emminger, CREOL/Univ. of Central Florida (United States)
Srikanth Sankaranarayanan, CREOL/Univ. of Central Florida (United States)
Aravinda Kar, CREOL/Univ. of Central Florida (United States)


Published in SPIE Proceedings Vol. 3888:
High-Power Lasers in Manufacturing
Xiangli Chen; Tomoo Fujioka; Akira Matsunawa, Editor(s)

© SPIE. Terms of Use
Back to Top