Share Email Print

Proceedings Paper

Finite element analysis of low-cost membrane deformable mirrors for high-order adaptive optics
Author(s): Robert S. Winsor; Anand Sivaramakrishnan; Russell B. Makidon
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We demonstrate the feasibility of glass membrane deformable mirror (DM) support structures intended for very high order low-stroke adaptive optics systems. We investigated commercially available piezoelectric ceramics. Piezoelectric tubes were determined to offer the largest amount of stroke for a given amount of space on the mirror surface that each actuator controls. We estimated the minimum spacing and the maximum expected stroke of such actuators. We developed a quantitative understanding of the response of a membrane mirror surface by performing a Finite Element Analysis (FEA) study. The results of the FEA analysis were used to develop a design and fabrication process for membrane deformable mirrors of 200 - 500 micron thicknesses. Several different values for glass thickness and actuator spacing were analyzed to determine the best combination of actuator stoke and surface deformation quality. We considered two deformable mirror configurations. The first configuration uses a vacuum membrane attachment system where the actuator tubes' central holes connect to an evacuated plenum, and atmospheric pressure holds the membrane against the actuators. This configuration allows the membrane to be removed from the actuators, facilitating easy replacement of the glass. The other configuration uses precision bearing balls epoxied to the ends of the actuator tubes, with the glass membrane epoxied to the ends of the ball bearings. While this kind of DM is not serviceable, it allows actuator spacings of 4 mm, in addition to large stroke. Fabrication of a prototype of the latter kind of DM was started.

Paper Details

Date Published: 29 October 1999
PDF: 8 pages
Proc. SPIE 3785, Advanced Telescope Design, Fabrication, and Control, (29 October 1999); doi: 10.1117/12.367614
Show Author Affiliations
Robert S. Winsor, Space Telescope Science Institute (United States)
Anand Sivaramakrishnan, Space Telescope Science Institute (United States)
Russell B. Makidon, Space Telescope Science Institute (United States)

Published in SPIE Proceedings Vol. 3785:
Advanced Telescope Design, Fabrication, and Control
William Roybal, Editor(s)

© SPIE. Terms of Use
Back to Top