Share Email Print
cover

Proceedings Paper

How we split the IASI beamsplitter
Author(s): Francois Henault; Christian Buil; Antoine Copin; Benoit Chidaine; Xavier Bozec
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The IASI instrument is a fourier-transform spectrometer (FTS) providing spectra of the Earth's atmosphere observed from space. The heart of the instrument is a Michelson interferometer (IHOS) equipped with hollow cube-corners retro-reflectors in place of the classical flat mirrors. One of the most critical components of the IHOS is its IR beamsplitter dividing and recombining the incident rays in order to create the interferograms. The beamsplitter chromatisms must not exceed a quarter-wave, while the required transmission efficiency should ideally be higher than 0.35 over the whole. Instrument spectral domain, with a particular emphasis on the radiometric performance between 14 and 15.5 micrometers due to mission constraints. Practically, it would dictate the choice of the Potassium Bromide material for the plates substrate, however this material presents severe moisture and mechanical constraints. This is the reason why we have looked for an alternative solution based on the use of thin ZnSe plates. Theoretical analyses and numerical examples of the beamsplitter radiometric and chromatic performance confirm that this design is feasible for two different geometrical configurations: a classical beamsplitter with grouped parallel plates, and a rather unusual design including a remote compensating plate which will be set perpendicular to the transmitted optical beam.

Paper Details

Date Published: 28 September 1999
PDF: 12 pages
Proc. SPIE 3786, Optomechanical Engineering and Vibration Control, (28 September 1999); doi: 10.1117/12.363808
Show Author Affiliations
Francois Henault, Alcatel Space Industries (France)
Christian Buil, Ctr. National d'Etudes Spatiales (France)
Antoine Copin, Alcatel Space Industries (France)
Benoit Chidaine, Alcatel Space Industries (France)
Xavier Bozec, REOSC (France)


Published in SPIE Proceedings Vol. 3786:
Optomechanical Engineering and Vibration Control
Eddy A. Derby; Eddy A. Derby; Colin G. Gordon; Colin G. Gordon; Daniel Vukobratovich; Carl H. Zweben; Daniel Vukobratovich; Paul R. Yoder; Carl H. Zweben, Editor(s)

© SPIE. Terms of Use
Back to Top