Share Email Print
cover

Proceedings Paper

First test results from a high-resolution CdZnTe pixel detector with VLSI readout
Author(s): Walter R. Cook; Steven E. Boggs; Aleksey E. Bolotnikov; Jill A. Burnham; Fiona A. Harrison; Branislav Kecman; Brian Matthews; Steven M. Schindler; Michael Fitzsimmons
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We are developing a CdZnTe pixel detector with a custom low- noise analog VLSI readout for use in the High-Energy Focusing Telescope balloon experiment, as well as for future space astronomy applications. The goal of the program is to achieve good energy resolution (< 1 keV FWHM at 60 keV) and low threshold in a sensor with approximately 500 micrometers pixels. We have fabricated several prototype detector assemblies with 2 mm thick, 680 by 650 micrometers pitch CdZnTe pixel sensors indium bump bonded a VLSI readout chip developed at Caltech. Each readout circuit in the 8 X 8 prototype is matched to the detector pixel size, and contains a preamplifier, shaping amplifiers, and a peak stretcher/discriminator. In the first 8 X 8 prototype, we have demonstrated the low-noise preamplifier by routing the output signals off-chip for shaping and pulse-height analysis. Pulse height spectra obtained using a 241Am source, collimated to illuminate a single pixel, show excellent energy resolution of 1.1 keV FWHM for the 60 keV line at room temperature. Line profiles are approximately Gaussian and dominated by electronic noise, however a small low energy tail is evident for the 60 keV line. We obtained slightly improved resolution of 0.9 keV FWHM at 60 keV by cooling the detector to 5 degree(s)C, near the expected balloon- flight operating temperature. Pulse height spectra obtained with the collimated source positioned between pixels show the effect of signal sharing for events occurring near the boundary. We are able to model the observed spectra using a Monte-Carlo simulation that includes the effects of photon interaction, charge transport and diffusion, pixel and collimator geometry, and electronic noise. By using the model to simulate the detector response to uncollimated radiation (including the effect of finite trigger threshold for reconstruction of the total energy of multi-pixel events), we find the energy resolution to be degraded by only 10% for full-face illumination, compared to the collimated case. The small value of the degradation is due directly to the low readout noise and amplifier threshold.

Paper Details

Date Published: 1 October 1999
PDF: 5 pages
Proc. SPIE 3769, Penetrating Radiation Systems and Applications, (1 October 1999); doi: 10.1117/12.363688
Show Author Affiliations
Walter R. Cook, California Institute of Technology (United States)
Steven E. Boggs, California Institute of Technology (United States)
Aleksey E. Bolotnikov, California Institute of Technology (United States)
Jill A. Burnham, California Institute of Technology (United States)
Fiona A. Harrison, California Institute of Technology (United States)
Branislav Kecman, California Institute of Technology (United States)
Brian Matthews, California Institute of Technology (United States)
Steven M. Schindler, California Institute of Technology (United States)
Michael Fitzsimmons, Jet Propulsion Lab. (United States)


Published in SPIE Proceedings Vol. 3769:
Penetrating Radiation Systems and Applications
F. Patrick Doty, Editor(s)

© SPIE. Terms of Use
Back to Top