Share Email Print
cover

Proceedings Paper

Pinhole closure in spatial filters of large-scale ICF laser systems
Author(s): R. G. Bikmatov; Charles D. Boley; I. N. Burdonsky; V. M. Chernyak; A. V. Fedorov; A. Yu. Goltsov; V. N. Kondrashov; S. N. Koptyaev; N. G. Kovalsky; V. N. Kuznetsov; David Milam; James E. Murray; Michael I. Pergament; V. M. Petryakov; Ruslan V. Smirnov; Victor I. Sokolov; E. V. Zhuzhukalo
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Pinhole plasma effects on parameters of the laser beam passing through the spatial filter in conditions of interest for large scale ICF laser facilities were investigated. The experiments on pinhole irradiation were conducted at power density range 1010-1011 W/cm2 with approximately 15 ns laser pulses. Al, Fe, and Ta pinholes were used. The diagnostic approach was chosen based on probing the pinhole region with frequency doubled 3-ns-long laser pulse. Ablative-plasma dynamics was studied with shadowgraphy and interferometry. Also measured were the parameters of transmitted probing beam in the near- and far-fields. The rate of pinhole 'closure' is found to decrease with the increase in the atomic number of pinhole material. The rate o pinhole closure ranges from approximately 5*106 cm/s for aluminum pinhole down to approximately 2*106 cm/s for tantalum pinhole in experiments with power density at the pinhole edge of approximately 50 GW/cm2. For aluminum and steel pinholes the parameters of the transmitted probing beam deteriorate to unacceptable level for approximately 15-20 ns after the irradiation start. In the same experimental conditions the pinholes of tantalum exhibits acceptable performance till the end of the irradiation process. Fast plasma jets converging to the pinhole axis with velocities up to approximately 107 cm/s and significantly deteriorating transmitted probing beam quality are observed. Reasonable agreement was found between the data obtained in experiments with circular pinholes and linear edge experiments.

Paper Details

Date Published: 23 July 1999
PDF: 14 pages
Proc. SPIE 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, (23 July 1999); doi: 10.1117/12.354165
Show Author Affiliations
R. G. Bikmatov, Troitsk Institute for Innovation and Fusion Research (Russia)
Charles D. Boley, Lawrence Livermore National Lab. (United States)
I. N. Burdonsky, Troitsk Institute for Innovation and Fusion Research (Russia)
V. M. Chernyak, Troitsk Institute for Innovation and Fusion Research (Russia)
A. V. Fedorov, Troitsk Institute for Innovation and Fusion Research (Russia)
A. Yu. Goltsov, Troitsk Institute for Innovation and Fusion Research (Russia)
V. N. Kondrashov, Troitsk Institute for Innovation and Fusion Research (Russia)
S. N. Koptyaev, Troitsk Institute for Innovation and Fusion Research (Russia)
N. G. Kovalsky, Troitsk Institute for Innovation and Fusion Research (Russia)
V. N. Kuznetsov, Troitsk Institute for Innovation and Fusion Research (Russia)
David Milam, Lawrence Livermore National Lab. (United States)
James E. Murray, Lawrence Livermore National Lab. (United States)
Michael I. Pergament, Troitsk Institute for Innovation and Fusion Research (Russia)
V. M. Petryakov, Troitsk Institute for Innovation and Fusion Research (Russia)
Ruslan V. Smirnov, Troitsk Institute for Innovation and Fusion Research (Russia)
Victor I. Sokolov, Troitsk Institute for Innovation and Fusion Research (Russia)
E. V. Zhuzhukalo, Troitsk Institute for Innovation and Fusion Research (Russia)


Published in SPIE Proceedings Vol. 3492:
Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion
W. Howard Lowdermilk, Editor(s)

© SPIE. Terms of Use
Back to Top