Share Email Print
cover

Proceedings Paper

Process optimization of a negative-tone CVD photoresist for 193-nm lithography applications
Author(s): Olivier P. Joubert; D. Fuard; Cedric Monget; Patrick Schiavone; Olivier Toublan; Alain Prola; J. M. Temerson; R. L. Inglebert; Timothy W. Weidman; Michael P. Nault; N. Bekiaris
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

New photoresists and processes are required for sub 0.15 micrometers design rules and currently an important effort is on- going for single layer resists optimization at 193 nm. Top surface imaging can be an interesting alternative approach. An all dry chemical vapor deposition (CVD) process based on plasma polymerized methylsilane (PPMS) or plasma polymerized dimethylsilane (PP2MS) provides a thin conformal and photosensitive layer at 193 nm. A thin amorphous film of Si- Si bonded material is deposited using plasma enhanced chemical vapor deposition with methylsilane or dimethylsilane as the gas precursor. Upon 193 nm exposure under air, photo-induced oxidation of the CVD resist occurs, generating a latent image. The image is then developed in a chlorine-based plasma, providing a negative tone process. This mask can be used to pattern a thick organic underlayer to provide a general bilevel process. Lithographic results on both a 193 microstepper as well as a full field production stepper are presented: resolution down to 0.10 micrometers equal L/S was obtained. A preliminary comparison between PPMS and PP2MS materials is presented, including FTIR results, stability of the films in air and lithographic performance including line edge roughness.

Paper Details

Date Published: 11 June 1999
PDF: 10 pages
Proc. SPIE 3678, Advances in Resist Technology and Processing XVI, (11 June 1999); doi: 10.1117/12.350191
Show Author Affiliations
Olivier P. Joubert, France Telecom CNET-CNS and Lab. des Technologies de la Microelectronique (France)
D. Fuard, France Telecom CNET-CNS and Lab. des Technologies de la Microelectronique (France)
Cedric Monget, France Telecom CNET-CNS (France)
Patrick Schiavone, France Telecom CNET-CNS (France)
Olivier Toublan, France Telecom CNET-CNS (France)
Alain Prola, France Telecom CNET-CNS (France)
J. M. Temerson, France Telecom CNET-CNS (France)
R. L. Inglebert, Univ. d'Orleans (France)
Timothy W. Weidman, Applied Materials, Inc. (United States)
Michael P. Nault, Applied Materials, Inc. (United States)
N. Bekiaris, Applied Materials, Inc. (United States)


Published in SPIE Proceedings Vol. 3678:
Advances in Resist Technology and Processing XVI
Will Conley, Editor(s)

© SPIE. Terms of Use
Back to Top