Share Email Print
cover

Proceedings Paper

Post-etching polymer removal in sub-half-micron device technology
Author(s): Simon Y. M. Chooi; Zainab Ismail; Ping-Yu Ee; Mei-Sheng Zhou
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The accomplishment of low-resistance interconnecting high- density ULSI integrated devices depends on the cleanliness of the via holes before metal deposition. This paper studies the polymer removal of via cleaning after etching and oxygen ashing using hydroxylamine-based organic solvent on an on-axis spray processor. An investigation into the effect of different process parameters such as spray pressure, rotational speed, cleaning duration and cleaning temperature was carried out. While the variation of spray pressure and rotational does not produce significant changes in the via resistance, the variation in the cleaning duration sees a lower via resistance as the duration is decreased. Additionally, the variation in cleaning temperature produces a process window between 75 degrees Celsius and 85 degrees Celsius (inclusive). The bypassing of isopropyl alcohol in the cleaning sequence gives comparable electrical resistance but suffers from high particle counts. There is no significant difference in via resistance for wafers processed on both Semitool Magnum and the wet bench. High resistance of zero and negative enclosed vias is found to be linked to the attack of titanium in the overlying metal stack.

Paper Details

Date Published: 4 September 1998
PDF: 10 pages
Proc. SPIE 3508, Multilevel Interconnect Technology II, (4 September 1998); doi: 10.1117/12.324026
Show Author Affiliations
Simon Y. M. Chooi, Chartered Semiconductor Manufacturing Ltd. (Singapore)
Zainab Ismail, Chartered Semiconductor Manufacturing Ltd. (Singapore)
Ping-Yu Ee, Chartered Semiconductor Manufacturing Ltd. (Singapore)
Mei-Sheng Zhou, Chartered Semiconductor Manufacturing Ltd. (Singapore)


Published in SPIE Proceedings Vol. 3508:
Multilevel Interconnect Technology II
Mart Graef; Divyesh N. Patel, Editor(s)

© SPIE. Terms of Use
Back to Top