Share Email Print
cover

Proceedings Paper

Pseudo-shear universal actuator driving flextensional-panel-diaphragm low-frequency acoustic source
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Acoustic source used for Active Noise Control at low frequency (80 - 250 Hz) is designed and developed by using a piezoelectric ceramic actuator and a flextensional panel diaphragm. In order to reach the vibration magnitude and radiation area needed for high and flat sound pressure level in the low frequency range. Pseudo-Shear Universal (PSU) actuator has been used as the driving part which is a new type of multilayer piezoelectric actuator originated from MRL offering the advantages of large displacement and high blocking force; on the other hand, Carbon Fiber Reinforced Composite has been used as the diaphragm material which provides a more rigid structure than conventional loudspeaker paper. A prototype device was fabricated which has the following characterizations: 40 layers PSU actuator with a compact dimension: 38 mm X 50 mm X 23.6 mm. Two of them are needed for a device. Diaphragm area is 126 mm X 152 mm. At quasistatic condition (5 Hz) and at the 0.84 kV/cm electric field, 344 micrometers displacement could be achieved at the apex of the diaphragm resulted from the flextensional amplifying mechanism with an amplification factor more than 11. The sound passive level in the frequency range 100 - 250 Hz shows better flat behavior than the acoustic sources studied earlier such as Double Amplifier and PANEL air transducers which exhibit a significant reduction of sound pressure level in the low frequency range. By a slight modification, it is likely to make this device in a total thickness of 10 - 15 mm range. High and stable sound pressure level as well as thin flat structure make it much more competitive in the whole area of applications for low frequency active noise control.

Paper Details

Date Published: 27 July 1998
PDF: 9 pages
Proc. SPIE 3329, Smart Structures and Materials 1998: Smart Structures and Integrated Systems, (27 July 1998); doi: 10.1117/12.316886
Show Author Affiliations
Ruibin Liu, The Pennsylvania State Univ. (United States)
Qing-Ming Wang, The Pennsylvania State Univ. (United States)
Qi Ming Zhang, The Pennsylvania State Univ. (United States)
Valery D. Kugel, The Pennsylvania State Univ. (United States)
Leslie Eric Cross, The Pennsylvania State Univ. (United States)


Published in SPIE Proceedings Vol. 3329:
Smart Structures and Materials 1998: Smart Structures and Integrated Systems
Mark E. Regelbrugge, Editor(s)

© SPIE. Terms of Use
Back to Top