Share Email Print
cover

Proceedings Paper

Inorganic antireflective coating process for deep-UV lithography
Author(s): Qizhi He; Wei W. Lee; Maureen A. Hanratty; Daty Rogers; Guoqiang Xing; Abha Singh; Eden Zielinski
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Antireflective coatings (ARCs) have been used to enhance IC lithography for years, however, many conventional bottom ARCs can no longer maintain acceptable linewidth control, cannot meet stringent deep-UV (DUV) photoresist processing requirements, and increase the etch complexity. In this paper, we report the development of an inorganic ARC for DUV lithography in sub-0.25 micrometer advanced device applications. Plasma-enhanced chemical vapor deposition (PECVD) is employed to deposit a dielectric film silicon oxynitride (SixOyNz) with specific optical properties. The three optical parameters of the SixOyNz film: refractive index n, extinction coefficient k, and thickness d are specifically designed to ensure that the reflection light that passes through the ARC/substrate is equal in amplitude and opposite in phase to the reflected light from the resist/ARC interface. The reflection light is canceled by destructive interference and therefore photoresist receives the minimum substrate reflection wave. Using this technique, we have successfully patterned features at 0.25 micrometer and below. The dielectric film can not only function as an ARC layer, but also serve as a hardmask for the pattern transfer etch process. With an aggressive etch bias process, linewidths down to 0.60 micrometer poly-Si gate are achieved with good linewidth control (3(sigma) less than 12 nm) and a near perfect linearity. For the marginal metal etch resistance of DUV photoresist, the designed SixOyNz is effective in imparting more etch resistance and suppressing metal substrate reflection. Excellent optical uniformity of the n, k and thickness d of the SixOyNz ARC is obtained with a manufacturable PECVD deposition process.

Paper Details

Date Published: 29 June 1998
PDF: 10 pages
Proc. SPIE 3334, Optical Microlithography XI, (29 June 1998); doi: 10.1117/12.310763
Show Author Affiliations
Qizhi He, Texas Instruments Inc. (United States)
Wei W. Lee, Texas Instruments Inc. (United States)
Maureen A. Hanratty, Texas Instruments Inc. (United States)
Daty Rogers, Texas Instruments Inc. (United States)
Guoqiang Xing, Texas Instruments Inc. (United States)
Abha Singh, Texas Instruments Inc. (United States)
Eden Zielinski, Texas Instruments Inc. (United States)


Published in SPIE Proceedings Vol. 3334:
Optical Microlithography XI
Luc Van den Hove, Editor(s)

© SPIE. Terms of Use
Back to Top