Share Email Print
cover

Proceedings Paper

Ultrasonic cure and temperature monitoring of photoresist during the pre-exposure bake process
Author(s): Susan L. Morton; F. Levent Degertekin; Butrus T. Khuri-Yakub
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A system of in situ ultrasonic sensors has been developed that can be used to monitor the photoresist prebake process. A high frequency phase measurement monitors the resist film properties while a lower frequency time of flight measurement monitors the corresponding wafer temperature. The high frequency measurement involves calculating the phase of an ultrasound signal as it is reflected from the silicon/photoresist interface. As the photoresist film changes in thickness and viscoelastic properties, the phase of the reflected signal will change. In this way, it is possible to follow how the photoresist film changes as it bakes; the solvent evaporates from the resist, decreasing the thickness and increasing the density. Results indicate that there is a phase minimum at a repeatable temperature, believed to be the softening or glass transition temperature (Tg). The lower frequency (200 kHz) time of flight measurement employs PZT-5H piezoelectric transducers bonded to a quartz buffer rod. The transducer generates a Lamb wave in the wafer which is then detected at another location by an identical transducer. The time of flight of the Lamb wave through the wafer depends linearly on temperature. Using these two sensors, we can measure the wafer temperature and the photoresist properties during prebake; providing us with the information necessary for in situ process control.

Paper Details

Date Published: 8 June 1998
PDF: 8 pages
Proc. SPIE 3332, Metrology, Inspection, and Process Control for Microlithography XII, (8 June 1998); doi: 10.1117/12.308733
Show Author Affiliations
Susan L. Morton, Stanford Univ. (United States)
F. Levent Degertekin, Stanford Univ. (United States)
Butrus T. Khuri-Yakub, Stanford Univ. (United States)


Published in SPIE Proceedings Vol. 3332:
Metrology, Inspection, and Process Control for Microlithography XII
Bhanwar Singh, Editor(s)

© SPIE. Terms of Use
Back to Top