Share Email Print
cover

Proceedings Paper

Comparison of line shortening assessed by aerial image and wafer measurements
Author(s): Wolfram Ziegler; Rainer Pforr; Joerg Thiele; Wilhelm Maurer
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Increasing number of patterns per area and decreasing linewidth demand enhancement technologies for optical lithography. OPC, the correction of systematic non-linearity in the pattern transfer process by correction of design data is one possibility to tighten process control and to increase the lifetime of existing lithographic equipment. The two most prominent proximity effects to be corrected by OPC are CD variation and line shortening. Line shortening measured on a wafer is up to 2 times larger than full resist simulation results. Therefore, the influence of mask geometry to line shortening is a key item to parameterize lithography. The following paper discusses the effect of adding small serifs to line ends with 0.25 micrometer ground-rule design. For reticles produced on an ALTA 3000 with standard wet etch process, the corner rounding on them mask can be reduced by adding serifs of a certain size. The corner rounding was measured and the effect on line shortening on the wafer is determined. This was investigated by resist measurements on wafer, aerial image plus resist simulation and aerial image measurements on the AIMS microscope.

Paper Details

Date Published: 12 February 1997
PDF: 9 pages
Proc. SPIE 3236, 17th Annual BACUS Symposium on Photomask Technology and Management, (12 February 1997); doi: 10.1117/12.301203
Show Author Affiliations
Wolfram Ziegler, Siemens Semiconductors (Germany)
Rainer Pforr, Simec (Germany)
Joerg Thiele, Siemens Semiconductors (Germany)
Wilhelm Maurer, Siemens Semiconductors (Germany)


Published in SPIE Proceedings Vol. 3236:
17th Annual BACUS Symposium on Photomask Technology and Management
James A. Reynolds; Brian J. Grenon, Editor(s)

© SPIE. Terms of Use
Back to Top