Share Email Print
cover

Proceedings Paper

Development of a telecentric 3D sensor for large-volume inspection
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In this communication we propose a design combining the advantages of the space invariance of telecentric triangulation with high relative lateral resolution and large measuring volume at the same time. Because the scan motion of the laser beam is decoupled from physical transport of the sensor head, this enables the fast scan in large volume. However we need a large aperture optics as large as the scan areas. We used a liquid mirror as aperture for this scanner. The surface of a spinning reflecting liquid takes the shape of a paraboloid that can be used as a reflecting mirror. This very old and nearly forgotten concept as recently been revived, with success. Low costs, large sizes, high optical qualities are the main advantages of liquid mirrors. The main limitation of liquid mirrors come from the fact that the optical axis must be aligned vertically and cannot be tilted. The prototype involves a stand-off distance of 1.5 meters, a scan length up to 1 meter (telecentric), a depth of view of 1 meter and a relative depth resolution of 1 mm (can be less). The design is based on the auto-synchronized scanner and is well corrected for field scanning distortion (f-0).

Paper Details

Date Published: 10 December 1997
PDF: 11 pages
Proc. SPIE 3204, Three-Dimensional Imaging and Laser-based Systems for Metrology and Inspection III, (10 December 1997); doi: 10.1117/12.294450
Show Author Affiliations
Simon Thibault, National Optics Institute (Canada) and Univ. Laval (Canada)
Stan Szapiel, COM DEV Ltd. (Canada)
Ermanno F. Borra, Univ. Laval (Canada)


Published in SPIE Proceedings Vol. 3204:
Three-Dimensional Imaging and Laser-based Systems for Metrology and Inspection III
Kevin G. Harding; Donald J. Svetkoff, Editor(s)

© SPIE. Terms of Use
Back to Top