Share Email Print
cover

Proceedings Paper

Monochromators for small-cross-section x-ray beams from high heat flux synchrotron sources
Author(s): Gene E. Ice; Bernie Riemer; Ali M. Khounsary
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

For some x-ray experiments, only a fraction of the intense central cone of x-rays generated by high-power undulator sources can be used; the x-ray source emittance is larger than the useful emittance for the experiment. For example with microfocusing optics, or for coherence experiments, x- ray beams with cross sections less than 0.1 mm2 are desirable. With such small beams, the total thermal load is small even though the heat flux density is high. Analyses indicate that under these conditions, rather simple crystal cooling techniques can be used. We illustrate the advantages of a small beam monochromator, with a simple x-ray monochromator optimized for x-ray microdiffraction. This monochromator is designed to achieve negligible distortion when subjected to a narrow beam from an APS undulator A operating at 100 mA. It also allows for rapid and repeatable energy scans and rapid cycling between monochromatic and white beam conditions.

Paper Details

Date Published: 21 November 1996
PDF: 10 pages
Proc. SPIE 2855, High Heat Flux Engineering III, (21 November 1996); doi: 10.1117/12.259833
Show Author Affiliations
Gene E. Ice, Oak Ridge National Lab. (United States)
Bernie Riemer, Oak Ridge National Lab. (United States)
Ali M. Khounsary, Argonne National Lab. (United States)


Published in SPIE Proceedings Vol. 2855:
High Heat Flux Engineering III
Ali M. Khounsary, Editor(s)

© SPIE. Terms of Use
Back to Top